PA Systems
JBL PRX425 + JBL PRX418S + CROWN XLi2500 + CROWN XLi3500 + DBX DriveRack PA2
R 76500.00
Please email sales@nxtleveltech.co.za to enquire about this product
2x JBL PRX425
15" Two-Way Loudspeaker System
PRX425 dual fifteen-inch, two-way is the perfect choice for DJ’s and bands who need low-frequency extension from the convenience of a stand-alone cabinet.

FEATURES
Dual 15" two-way design
90° x 50° coverage
Heavy Duty 16 gauge protective screen backed steel grille
Tough DuraFlex™ enclosure finish
SonicGuard™ protects the highfrequency driver from excess power without interrupting the performance.

APPLICATIONS
Live sound reinforcement for vocals and musical instruments
The perfect choice for DJ’s and bands who need low-frequency extension from the convenience of a stand-alone cabinet.

SPECIFICATIONS
Frequency Range (-10 dB) 48 Hz – 19 kHz
Frequency Response (+3 dB) 61 Hz – 16 kHz
Coverage Pattern 90° x 50° nominal
System Sensitivity 100 dB SPL (1w@1m)
Power Rating, Pink Noise 600 W / 1200 W / 2400 W
(Continuous/Program/Peak)
Rated Maximum SPL 134 dB SPL peak
Nominal Impedance 4 ohms
Dimensions (H x W x D): 1044 mm x 429 mm x 521 mm
(41.1" x 16.9" x 20.5")
Net Weight 33.5 kg (74 lbs.

2x JBL PRX418S
18" Subwoofer

18" Subwoofer
PRX418S is an eighteen inch subwoofer which, when combined with the two-way models, provides a sub/sat system capable of generating 135 dB of full-range, high quality audio.

FEATURES
Tough DuraFlexT finish enclosure
Heavy Duty 16 gauge protective screen backed steel grille

SPECIFICATIONS
Frequency Range 35 Hz – 250 Hz
Frequency Response 52 Hz – 120 Hz
System Sensitivity 95 dB SPL (1w@1m)
Power Rating, Pink Noise 800 W / 1600 W / 3200 W
(Continuous/Program/Peak)
Rated Maximum SPL 130 dB SPL peak
Nominal Impedance 8 ohms
Dimensions (H x W x D) 678 mm x 536 mm x 615 mm
(26.7" x 21.1" x 24.2")
Net Weight 36 kg (79 lbs.)

Crown XLi2500
Powerful. Reliable. Affordable.
The XLI Series of power amplifiers from Crown® represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.

The four models in the series are the XLi800, XLi1500, XLi2500 and XLi3500. They are identical except for output power.

Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon® and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.

With over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series. They are a powerful argument for quality and value!

Stereo/parallel/bridge-mono mode
User selectable input sensitivity - 0.775V and 1.4V
Efficient forced-air cooling prevents excessive thermal buildup
Electronically balanced RCA & XLR inputs; binding post and Speakon ® outputs
Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
Protection against shorts, no-load, on/off thumps and radio-frequency interference

Frequency Response 20 Hz - 20 kHz, +0/-1 dB (at 1 watt)
THD <0.5%, 20 Hz - 20 kHz
Intermodulation Distortion =/ <0.35% (60 Hz and 7 kHz at 4:1 from full rated ouput to -30 dB)
Slew Rate >10V/us
Voltage Gain 33 dB
Damping Factor (8 ohms, 10 Hz to 400 Hz) >200
Signal To Noise Ratio (A-weighted) >100 dB
Crosstalk (below rated power) 20 Hz to 1 kHz -75 dB, -59 dB
Input Sensitivity (for full rated power at 8 ohms) 0.775V or 1.4V
Input Impedance (nominal balanced, unbalanced) 20kΩ, 10kΩ
AC Line Voltage and Frequency Configurations Available (+10%) 120V~60 Hz; 220V~50/60 Hz; 230-240V~50/60 Hz
Dimensions 19" x 3.5" x 12.4" (48.3cm x 8.9cm x 31.5cm)
Weight 29.7lbs (13.5kg)
IEC Power Connector 15A

Crown XLi3500
Two-channel, 1350W Power Amplifier

The XLI Series of power amplifiers from Crown® represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.

The four models in the series are the XLi800, XLi1500, XLi2500 and XLi3500. They are identical except for output power.

Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon® and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.

With over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series. They are a powerful argument for quality and value!

Stereo/parallel/bridge-mono mode
User selectable input sensitivity - 0.775V and 1.4V
Efficient forced-air cooling prevents excessive thermal buildup
Electronically balanced RCA & XLR inputs; binding post and Speakon outputs
Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
Protection against shorts, no-load, on/off thumps and radio-frequency interference

Frequency Response 20 Hz - 20 kHz, +0/-1 dB (at 1 watt)
THD <0.5%, 20 Hz - 20 kHz
Intermodulation Distortion =/ <0.35% (60 Hz and 7 kHz at 4:1 from full rated ouput to -30 dB)
Slew Rate >10V/us
Voltage Gain 36 dB
Damping Factor (8 ohms, 10 Hz to 400 Hz) >200
Signal To Noise Ratio (A-weighted) >100 dB
Crosstalk (below rated power) 20 Hz to 1 kHz -75 dB, -59 dB
Input Sensitivity (for full rated power at 8 ohms) 0.775V or 1.4V
Input Impedance (nominal balanced, unbalanced) 20kΩ, 10kΩ
AC Line Voltage and Frequency Configurations Available (+10%) 120V~60 Hz; 220V~50/60 Hz; 230-240V~50/60 Hz
Dimensions 19" x 3.5" x 14.4" (48.3cm x 8.9cm x 36.6cm)
Weight 43lbs (19.5kg)
IEC Power Connector 15A

DBX DriveRack PA 2
Complete Loudspeaker Management System

ALL YOU NEED TO GET THE MOST FROM YOUR PA. NOW WITH COMPLETE CONTROL FROM YOUR MOBILE DEVICE.

The DriveRack® PA2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’s proprietary AutoEQ™ and AFS™ algorithms, a new input delay module for delaying the FOH system to the backline, Ethernet control via an Android®, iOS®, Mac®, or Windows® device, and updated Wizards, the DriveRack PA2 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.

AUTOEQ™

New, improved AutoEQ algorithm ensures an extremely accurate, fast, and non-intrusive automatic EQ experience.

With the RTA Mic “listening” to your room, the new, updated DriveRack PA2 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds. This means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise.

ENHANCED AFS™ FEEDBACK ELIMINATION

Enhanced AFS™ algorithm for faster, more precise feedback elimination, without adversely affecting your system’s tone.

Nothing turns audiences away like annoying and potentially painful audio feedback. Fortunately, dbx engineers have revisited their already-stellar Advanced Feedback Suppression algorithm and made it work even better. The DriveRack PA2 listens for and anticipates feedback and adjusts speaker output automatically before it even has a chance, while never altering your sound.

UPDATED WIZARD SETUP FUNCTIONS

Updated Wizards make initial set up easy, while ensuring speaker tunings and other settings are up-to-date.

Wizard functions on the DriveRack PA2 guide you through easy, step-by-step processes to help you get the most from your loudspeaker system. Helps you easily configure level balancing, AutoEQ, Advanced Feedback Suppression, and provides access to built-in and constantly updating speaker tunings from most major speaker manufacturers.

AVAILABLE INPUT PROCESSING
dbx Compression
AFS™ (Advanced Feedback Suppression)
Graphic EQ
8-Band Parametric EQ (adjusted when using the AutoEQ)
Subharmonic Synthesis

AVAILABLE OUTPUT PROCESSING
Crossover (supports full range, 2-way, and 3-way systems)
8-Band Parametric EQs (used for speaker tunings)
dbx Limiting
Driver Alignment Delays

Features
All New Setup Wizard
Streamlined AutoEQ™
All New AFS™ (Advanced Feedback Suppression)
Mobile Control (Android®, iOS®, Mac®, Windows®)
dbx Compression
Graphic EQ
8-Band Parametric EQ (adjusted when using the AutoEQ) Input
Subharmonic Synthesis
Crossover (supports full range, 2-way, and 3-way systems)
8-Band Parametric EQs (used for speaker tunings) Output
dbx Limiting
Driver Alignment Delays


TESTED WIRELESS ROUTERS:
Dlink 636L
Dlink Cloud router 2000
Cisco / linksys: WRT54G2V1
Netgear WGR614 v7
Netgear WNR 1000
(Other routers are likely compatible. This list represents those which have been tested thus far.)

Cable Included & Road Ready Rack Included
2x PRX425, 2x JBL PRX418S, CROWN XLi2500, CROWN XLi3500, DBX DriveRack PA2, Cable Included & Road Ready Rack Included